Les Pinces Micros :
The micro clamps cover measuring needs on small sized conductors up to 200A. Their thin jaws can enclose cables with a max diameter of 15mm which make them the ideal choice for measuring hard to reach conductors. This range exists for the measure of insulated conductors (M1, M2) as well as naked ones (M3 and M4 are 600V CAT III). The longer casing of the M2 and M4 allow space for a PCB, useful for some applications such as to improve the phase shift for power measurement or rectifying the signal for DC data loggers.

M1 & M3 models:

M1.UB Dedicated to low currents from 10mA to 50A Jaw opening: 15x17mm Starting at: 124 euros

M3.UB 600V cat III, dedicated to AC low currents from 10mA to 50mA Jaw opening: 15x17mm starting at: 172 euros

M1 & M1.U For AC current with voltage or current output from 100mA to 200A Jaw opening: 15x17mm starting at: 75 euros

M3 & M3.U 600V cat III, for AC current with voltage or current output from 100mA to 200A Jaw opening: 15x17mm starting at: 98 euros

M2 & M4 models :

M2.U M2.UB M2.V M2.VB Mono or multi ratio AC or DC output Primary AC Starting at: 96 euros

M4.U M4.UB M4.V M4.VB 600V cat III Mono or multi ratio AC or DC output Primary AC Starting at: 111 euros

Technical safety innovation "SIAC" Universal Technic innovates for your safety “SIAC”, Anti short circuit current system is a device made to prevent short circuit current. It makes the user safer. You can find it on the M3, M4 and SM clamps

M2.1C model:

M2.1C for AC/DC currents

Hall Effect technologies for the measure of DC currents from 10A up to 300A Primary: from 1A to 300A output : from 1 to 3V Cable diameter: 15mm Power supply: 9Vdc to 18Vdc Starting at: 153 euros

---

1, rue Robert et Sonia Delaunay 75011 PARIS - 01 43 700 800